CONTENTS

NAME

DBD::SQLite::Fulltext_search - Using fulltext searches with DBD::SQLite

DESCRIPTION

Introduction

SQLite is bundled with an extension module called "FTS" for full-text indexing. Tables with this feature enabled can be efficiently queried to find rows that contain one or more instances of some specified words (also called "tokens"), in any column, even if the table contains many large documents.

The first full-text search modules for SQLite were called FTS1 and FTS2 and are now obsolete. The latest version is FTS4, but it shares many features with the former module FTS3, which is why parts of the API and parts of the documentation still refer to FTS3; from a client point of view, both can be considered largely equivalent. Detailed documentation can be found at http://www.sqlite.org/fts3.html.

Short example

Here is a very short example of using FTS :

$dbh->do(<<"") or die DBI::errstr;
CREATE VIRTUAL TABLE fts_example USING fts4(content)

my $sth = $dbh->prepare("INSERT INTO fts_example(content) VALUES (?)");
$sth->execute($_) foreach @docs_to_insert;

my $results = $dbh->selectall_arrayref(<<"");
SELECT docid, snippet(fts_example) FROM fts_example WHERE content MATCH 'foo'

The key points in this example are :

There are many more details to building and searching FTS tables, so we strongly invite you to read the full documentation at http://www.sqlite.org/fts3.html.

QUERY SYNTAX

Here are some explanation about FTS queries, borrowed from the sqlite documentation.

Token or token prefix queries

An FTS table may be queried for all documents that contain a specified term, or for all documents that contain a term with a specified prefix. The query expression for a specific term is simply the term itself. The query expression used to search for a term prefix is the prefix itself with a '*' character appended to it. For example:

-- Virtual table declaration
CREATE VIRTUAL TABLE docs USING fts3(title, body);

-- Query for all documents containing the term "linux":
SELECT * FROM docs WHERE docs MATCH 'linux';

-- Query for all documents containing a term with the prefix "lin".
SELECT * FROM docs WHERE docs MATCH 'lin*';

If a search token (on the right-hand side of the MATCH operator) begins with "^" then that token must be the first in its field of the document : so for example ^lin* matches 'linux kernel changes ...' but does not match 'new linux implementation'.

Column specifications

Normally, a token or token prefix query is matched against the FTS table column specified as the right-hand side of the MATCH operator. Or, if the special column with the same name as the FTS table itself is specified, against all columns. This may be overridden by specifying a column-name followed by a ":" character before a basic term query. There may be space between the ":" and the term to query for, but not between the column-name and the ":" character. For example:

-- Query the database for documents for which the term "linux" appears in
-- the document title, and the term "problems" appears in either the title
-- or body of the document.
SELECT * FROM docs WHERE docs MATCH 'title:linux problems';

-- Query the database for documents for which the term "linux" appears in
-- the document title, and the term "driver" appears in the body of the document
-- ("driver" may also appear in the title, but this alone will not satisfy the.
-- query criteria).
SELECT * FROM docs WHERE body MATCH 'title:linux driver';

Phrase queries

A phrase query is a query that retrieves all documents that contain a nominated set of terms or term prefixes in a specified order with no intervening tokens. Phrase queries are specified by enclosing a space separated sequence of terms or term prefixes in double quotes ("). For example:

-- Query for all documents that contain the phrase "linux applications".
SELECT * FROM docs WHERE docs MATCH '"linux applications"';

-- Query for all documents that contain a phrase that matches "lin* app*". 
-- As well as "linux applications", this will match common phrases such 
-- as "linoleum appliances" or "link apprentice".
SELECT * FROM docs WHERE docs MATCH '"lin* app*"';

NEAR queries.

A NEAR query is a query that returns documents that contain a two or more nominated terms or phrases within a specified proximity of each other (by default with 10 or less intervening terms). A NEAR query is specified by putting the keyword "NEAR" between two phrase, term or prefix queries. To specify a proximity other than the default, an operator of the form "NEAR/<N>" may be used, where <N> is the maximum number of intervening terms allowed. For example:

-- Virtual table declaration.
CREATE VIRTUAL TABLE docs USING fts4();

-- Virtual table data.
INSERT INTO docs VALUES('SQLite is an ACID compliant embedded relational database management system');

-- Search for a document that contains the terms "sqlite" and "database" with
-- not more than 10 intervening terms. This matches the only document in
-- table docs (since there are only six terms between "SQLite" and "database" 
-- in the document).
SELECT * FROM docs WHERE docs MATCH 'sqlite NEAR database';

-- Search for a document that contains the terms "sqlite" and "database" with
-- not more than 6 intervening terms. This also matches the only document in
-- table docs. Note that the order in which the terms appear in the document
-- does not have to be the same as the order in which they appear in the query.
SELECT * FROM docs WHERE docs MATCH 'database NEAR/6 sqlite';

-- Search for a document that contains the terms "sqlite" and "database" with
-- not more than 5 intervening terms. This query matches no documents.
SELECT * FROM docs WHERE docs MATCH 'database NEAR/5 sqlite';

-- Search for a document that contains the phrase "ACID compliant" and the term
-- "database" with not more than 2 terms separating the two. This matches the
-- document stored in table docs.
SELECT * FROM docs WHERE docs MATCH 'database NEAR/2 "ACID compliant"';

-- Search for a document that contains the phrase "ACID compliant" and the term
-- "sqlite" with not more than 2 terms separating the two. This also matches
-- the only document stored in table docs.
SELECT * FROM docs WHERE docs MATCH '"ACID compliant" NEAR/2 sqlite';

More than one NEAR operator may appear in a single query. In this case each pair of terms or phrases separated by a NEAR operator must appear within the specified proximity of each other in the document. Using the same table and data as in the block of examples above:

-- The following query selects documents that contains an instance of the term 
-- "sqlite" separated by two or fewer terms from an instance of the term "acid",
-- which is in turn separated by two or fewer terms from an instance of the term
-- "relational".
SELECT * FROM docs WHERE docs MATCH 'sqlite NEAR/2 acid NEAR/2 relational';

-- This query matches no documents. There is an instance of the term "sqlite" with
-- sufficient proximity to an instance of "acid" but it is not sufficiently close
-- to an instance of the term "relational".
SELECT * FROM docs WHERE docs MATCH 'acid NEAR/2 sqlite NEAR/2 relational';

Phrase and NEAR queries may not span multiple columns within a row.

Set operations

The three basic query types described above may be used to query the full-text index for the set of documents that match the specified criteria. Using the FTS query expression language it is possible to perform various set operations on the results of basic queries. There are currently three supported operations:

The AND, OR and NOT binary set operators must be entered using capital letters; otherwise, they are interpreted as basic term queries instead of set operators. Each of the two operands to an operator may be a basic FTS query, or the result of another AND, OR or NOT set operation. Parenthesis may be used to control precedence and grouping.

The AND operator is implicit for adjacent basic queries without any explicit operator. For example, the query expression "implicit operator" is a more succinct version of "implicit AND operator".

Boolean operations as just described correspond to the so-called "enhanced query syntax" of sqlite; this is the version compiled with DBD::SQLite, starting from version 1.31. A former version, called the "standard query syntax", used to support tokens prefixed with '+' or '-' signs (for token inclusion or exclusion); if your application needs to support this old syntax, use DBD::SQLite::FTS3Transitional (published in a separate distribution) for doing the conversion.

TOKENIZERS

Concept

The behaviour of full-text indexes strongly depends on how documents are split into tokens; therefore FTS table declarations can explicitly specify how to perform tokenization:

CREATE ... USING fts4(<columns>, tokenize=<tokenizer>)

where <tokenizer> is a sequence of space-separated words that triggers a specific tokenizer. Tokenizers can be SQLite builtins, written in C code, or Perl tokenizers. Both are as explained below.

SQLite builtin tokenizers

SQLite comes with some builtin tokenizers (see http://www.sqlite.org/fts3.html#tokenizer) :

simple

Under the simple tokenizer, a term is a contiguous sequence of eligible characters, where eligible characters are all alphanumeric characters, the "_" character, and all characters with UTF codepoints greater than or equal to 128. All other characters are discarded when splitting a document into terms. They serve only to separate adjacent terms.

All uppercase characters within the ASCII range (UTF codepoints less than 128), are transformed to their lowercase equivalents as part of the tokenization process. Thus, full-text queries are case-insensitive when using the simple tokenizer.

porter

The porter tokenizer uses the same rules to separate the input document into terms, but as well as folding all terms to lower case it uses the Porter Stemming algorithm to reduce related English language words to a common root.

icu

The icu tokenizer uses the ICU library to decide how to identify word characters in different languages; however, this requires SQLite to be compiled with the SQLITE_ENABLE_ICU pre-processor symbol defined. So, to use this tokenizer, you need edit Makefile.PL to add this flag in @CC_DEFINE, and then recompile DBD::SQLite; of course, the prerequisite is to have an ICU library available on your system.

unicode61

The unicode61 tokenizer works very much like "simple" except that it does full unicode case folding according to rules in Unicode Version 6.1 and it recognizes unicode space and punctuation characters and uses those to separate tokens. By contrast, the simple tokenizer only does case folding of ASCII characters and only recognizes ASCII space and punctuation characters as token separators.

By default, "unicode61" also removes all diacritics from Latin script characters. This behaviour can be overridden by adding the tokenizer argument "remove_diacritics=0". For example:

-- Create tables that remove diacritics from Latin script characters
-- as part of tokenization.
CREATE VIRTUAL TABLE txt1 USING fts4(tokenize=unicode61);
CREATE VIRTUAL TABLE txt2 USING fts4(tokenize=unicode61 "remove_diacritics=1");

-- Create a table that does not remove diacritics from Latin script
-- characters as part of tokenization.
CREATE VIRTUAL TABLE txt3 USING fts4(tokenize=unicode61 "remove_diacritics=0");

Additional options can customize the set of codepoints that unicode61 treats as separator characters or as token characters -- see the documentation in http://www.sqlite.org/fts3.html#unicode61.

If a more complex tokenizing algorithm is required, for example to implement stemming, discard punctuation, or to recognize compound words, use the perl tokenizer to implement your own logic, as explained below.

Perl tokenizers

Declaring a perl tokenizer

In addition to the builtin SQLite tokenizers, DBD::SQLite implements a perl tokenizer, that can hook to any tokenizing algorithm written in Perl. This is specified as follows :

CREATE ... USING fts4(<columns>, tokenize=perl '<perl_function>')

where <perl_function> is a fully qualified Perl function name (i.e. prefixed by the name of the package in which that function is declared). So for example if the function is my_func in the main program, write

CREATE ... USING fts4(<columns>, tokenize=perl 'main::my_func')

Writing a perl tokenizer by hand

That function should return a code reference that takes a string as single argument, and returns an iterator (another function), which returns a tuple ($term, $len, $start, $end, $index) for each term. Here is a simple example that tokenizes on words according to the current perl locale

sub locale_tokenizer {
  return sub {
    my $string = shift;

    use locale;
    my $regex      = qr/\w+/;
    my $term_index = 0;

    return sub { # closure
      $string =~ /$regex/g or return; # either match, or no more token
      my ($start, $end) = ($-[0], $+[0]);
      my $len           = $end-$start;
      my $term          = substr($string, $start, $len);
      return ($term, $len, $start, $end, $term_index++);
    }
  };
}

There must be three levels of subs, in a kind of "Russian dolls" structure, because :

Using Search::Tokenizer

Instead of writing tokenizers by hand, you can grab one of those already implemented in the Search::Tokenizer module. For example, if you want ignore differences between accented characters, you can write :

use Search::Tokenizer;
$dbh->do(<<"") or die DBI::errstr;
CREATE ... USING fts4(<columns>, 
                      tokenize=perl 'Search::Tokenizer::unaccent')

Alternatively, you can use "new" in Search::Tokenizer to build your own tokenizer. Here is an example that treats compound words (words with an internal dash or dot) as single tokens :

sub my_tokenizer {
  return Search::Tokenizer->new(
    regex => qr{\p{Word}+(?:[-./]\p{Word}+)*},
   );
}

Fts4aux - Direct Access to the Full-Text Index

The content of a full-text index can be accessed through the virtual table module "fts4aux". For example, assuming that our database contains a full-text indexed table named "ft", we can declare :

CREATE VIRTUAL TABLE ft_terms USING fts4aux(ft)

and then query the ft_terms table to access the list of terms, their frequency, etc. Examples are documented in http://www.sqlite.org/fts3.html#fts4aux.

How to spare database space

By default, FTS stores a complete copy of the indexed documents, together with the fulltext index. On a large collection of documents, this can consume quite a lot of disk space. However, FTS has some options for compressing the documents, or even for not storing them at all -- see http://www.sqlite.org/fts3.html#fts4_options.

In particular, the option for contentless FTS tables only stores the fulltext index, without the original document content. This is specified as content="", like in the following example :

CREATE VIRTUAL TABLE t1 USING fts4(content="", a, b)

Data can be inserted into such an FTS4 table using an INSERT statements. However, unlike ordinary FTS4 tables, the user must supply an explicit integer docid value. For example:

-- This statement is Ok:
INSERT INTO t1(docid, a, b) VALUES(1, 'a b c', 'd e f');

-- This statement causes an error, as no docid value has been provided:
INSERT INTO t1(a, b) VALUES('j k l', 'm n o');

Of course your application will need an algorithm for finding the external resource corresponding to any docid stored within SQLite.

When using placeholders, the docid must be explicitly typed to INTEGER, because this is a "hidden column" for which sqlite is not able to automatically infer the proper type. So the following doesn't work :

my $sth = $dbh->prepare("INSERT INTO t1(docid, a, b) VALUES(?, ?, ?)");
$sth->execute(2, 'aa', 'bb'); # constraint error

but it works with an explicitly cast :

my $sql = "INSERT INTO t1(docid, a, b) VALUES(CAST(? AS INTEGER), ?, ?)",
my $sth = $dbh->prepare(sql);
$sth->execute(2, 'aa', 'bb');

or with an explicitly typed "bind_param" in DBI :

use DBI qw/SQL_INTEGER/;
my $sql = "INSERT INTO t1(docid, a, b) VALUES(?, ?, ?)";
my $sth = $dbh->prepare(sql);
$sth->bind_param(1, 2, SQL_INTEGER);
$sth->bind_param(2, "aa");
$sth->bind_param(3, "bb");
$sth->execute();

It is not possible to UPDATE or DELETE a row stored in a contentless FTS4 table. Attempting to do so is an error.

Contentless FTS4 tables also support SELECT statements. However, it is an error to attempt to retrieve the value of any table column other than the docid column. The auxiliary function matchinfo() may be used, but snippet() and offsets() may not, so if such functionality is needed, it has to be directly programmed within the Perl application.

AUTHOR

Laurent Dami <dami@cpan.org>

COPYRIGHT

Copyright 2014 Laurent Dami.

Some parts borrowed from the http://sqlite.org documentation, copyright 2014.

This documentation is in the public domain; you can redistribute it and/or modify it under the same terms as Perl itself.